I decided to make back-tab panels because I didn't want the ruched look of rod pocket drapes but I didn't think I had enough skill to make pinch pleats. I made these with a no-sew method and used only Stitch Wichery to hem and bond the fabric together. I may go over some of the seams with the sewing machine in the future, but for now, these drapes look great and are serving their purpose. This is a great way to easily create curtains for your home and the no sew technique works great if they will be dummy panels that you don't intend to pull across the window.
First, I started out by measuring and cutting both of my panels of fabric. I wanted curtains that were 106" long so I cut pieces of fabric that were 112", allowing 3" hems for the top and bottom.
Then, I used the Stitch Witchery to hem the sides of the fabric panels. I folded over 3/4" down both sides.
At this point, I had hemmed the top, bottom, and sides of the fabric panel. Here's what they looked like laying out on the floor.
I wanted to add a fabric lining to these curtains so they would look more polished and not look flimsy on the wall. I cut the lining to fit just inside the panel, "sewed" it to the top of the panel and then folded the seams of the fabric over onto the lining, ironing the Stich Wichery to hold it in place.
Then, I hemmed the bottom of the lining so that it laid over top of the hemmed fabric.
At that point, I was almost done. I then added tabs on the top of the fabric, at the right height, so that I could slide my curtain rod through. I don't have a picture of that, but basically it looks like strips of fabric on the back that the rod slides through.
And, here's the finished product:
Some of these pictures were taken at night, so the lighting and color of the room is a bit off. Here's a daytime picture:
Kevin and I are really happy with the result. It was a lot of work making these curtains, but we think they really look nice in the room. It's also amazing how much bigger the room feels with these floor to ceiling curtains. They add drama and a point of interest in the room.
Shared at:
They look great. I'd never heard of Stitch Witchery before, but I have added to my craft-store shopping list. :)
ReplyDeleteThey're gorgeous! WOW! Beautiful statement in your gorgeous dining room. I love them!
ReplyDeleteBeautiful Curtains! Love the fabric too.
ReplyDeleteGreat fabric! I make all of my panels this way! It's such a breeze! I can't believe I didn't figure this little trick out any sooner. I'm your newest follower too. Would love it if you stop by and follow me back. :)
ReplyDeletewww.alivedinhome.blogspot.com
Megan
Beautiful pattern choice! Love!! Your newest follower!!
ReplyDeletei love the pattern. Following your blog.
ReplyDeleteHi, What's the name of this fabric?
ReplyDeleteHi Leila, it's Loop De Loop by Duralee Fabrics in Smoke.
ReplyDeletehttp://lsfabrics.com/fabric/loop-d-loop-20996
Thank you very much! I love what you did. My bedroom is greenish and I think this fabric would be great :)
ReplyDeleteJust one more thing, how much fabric did you buy ? I'm trying to figure out how much I will need for my
ReplyDeleteI did single-width panels, so I only needed a little more than 2X the desired height of one panel. I ordered 6.5 yards. Just make sure you take into account about 6-8 inches extra per panel for hemming, etc.
ReplyDeleteHow did you create the tabs on the back. I am looking to create some curtains for our new place!!
ReplyDeleteHow far apart did you place the tabs on the back for the rod pocket?
ReplyDeleteWhat is the paint color you used?? Cute!
ReplyDeleteLove your fabric!! Had a question about it. In your picture the fabric looks very light like a light gray but when I've searched for this fabric online its been posted darker in color. Is it naturally light or darker on the gray side. Just wondering if this will match my living room.
ReplyDeleteI love this pattern and I want to make curtains for our living room that has a 20' ceiling. Can you tell me how WIDE your panels ended up being?
ReplyDeleteThe panels are one width of the fabric - the side hems, which ends up being around 51 inches wide. With the folds/pleats it doesn't actually take up that much room, but balances everything nicely. Here's a helpful guide on how wide your fabric panels should be: http://www.ehow.com/how_5589048_determine-curtain-panel-width.html
DeleteWhat color is your Dining room? I love that color, especially with those curtains! Great Job!
ReplyDeleteThe color in the dining room is Mindful Gray by Sherwin Williams
DeleteGorgeous curtains!! How many yards of fabric did you purchase? I am using the same fabric in my dining room, but I don't know how much to order. They will be the same length.
ReplyDeleteAt this point, I had hemmed the top, bottom, and sides of the fabric panel. Here's what they looked like laying out on the floor. evil eye necklace canada , evil eye necklace australia ,
ReplyDeleteIn a world that often promotes excess and overspending, it's refreshing to read about your practical and mindful approach to decorating.
ReplyDeletepromocodehq
Many thanks for your fantastic blog! Your commitment to sharing insightful information is admirable and greatly appreciated.lowes promo code generator
ReplyDeleteYour blog is a cool haven of information. You obviously put your heart and soul into each post, and it is greatly appreciated.pestie 10 off
ReplyDeleteYour blog is a creative and intellectual gem. We appreciate you sharing your talent with the world. hollister employee discount
ReplyDelete